Login and Security
NOTE:
The Restore to Factory Defaults resets the settings or section of settings.
Use this procedure as a last solution. Transfer your data from the system before you
start the procedure.
1. When the Login screen displays, press and hold Shift + Esc for 5 seconds.
The System Restore screen displays a warning that the System Restore will
return your system to the original factory shipped configuration. All patient data,
system setup changes, logs, and user data will be lost and unrecoverable.
2. Enter the serial number of the device in the Enter the system serial number
field. The Restore button enables when the serial number is entered correctly.
3. Select Restore to proceed with system restore.
The system configuration is reset to factory defaults and all patient data records
are deleted. The device reboots. You can access the device as the Default user
without login credentials.
4. To reconfigure the device, access the Settings screen from the user menu. A
login screen opens. Log on as Admin user with the default password admin123.
28 MAC VU360
™
Resting ECG Analysis System 2088531-370-2
To Next Page
Loading...
Need help?
General
