4 Aggregation
This section describes the online information about the Aggregation functionality,
presenting the System Status, Port Status and Port Statistics, menus, which are
located at the LACP menu.
If desired to update Reason Switches web screen automatically, check the Auto
Refresh checkbox on top to perform it. If selected, monitoring web page will be
updated after 3 seconds of the last update automatically.
System Status:
LACP System Status monitoring option allows user to view basic information about
Aggregation current usage in Reason Switches.
o Aggr ID, which is the aggregation ID of the instance shown;
o Partner System ID, which is the MAC address (system ID) of the
aggregation partner;
o Partner key, which is the key used in that aggregation instance;
o Partner priority;
o Last changed, that last time since each instance has changed;
o Local ports, presents switch ID plus port number, separated each
other by the “:” character;
Ports Status:
LACP Status option allows user to view information about LACP current usage per
port. While the System Status provides information of aggregation instances in given
equipment, Port Status allows verifying online status of the aggregation usage.
Information shown is as follows:
o Port number;
o LACP information for that port:
Yes, which means LACP enabled and link up;
No, which means LACP disabled or link down;
Backup, which means port not used at the aggregation,
but allowed to and can join aggregation group if one of
the aggregated ports leaves the group.
o Key assigned in the port;
o Aggregation ID;
o Partner System ID, which is the MAC address (system ID) of
aggregation partner;
To Next Page
Loading...
Need help?
General
