Chapter 2 – Safety Information
3 Installation, Commissioning and Servicing
3.1 Lifting Hazards
Many injuries are caused by:
Lifting heavy objects
Lifting things incorrectly
Pushing or pulling heavy objects
Using the same muscles repetitively
Plan carefully, identify any possible hazards and determine how best to move the
product. Look at other ways of moving the load to avoid manual handling. Use the
correct lifting techniques and Personal Protective Equipment (PPE) to reduce the risk
of injury.
3.2 Electrical Hazards
All personnel involved in installing, commissioning, or servicing
this equipment must be familiar with the correct working
procedures.
Consult the equipment documentation before installing,
commissioning, or servicing the equipment.
Always use the equipment as specified. Failure to do so will
jeopardise the protection provided by the equipment.
Removal of equipment panels or covers may
expose hazardous live parts. Do not touch until
the electrical power is removed. Take care when
there is unlocked access to the rear of the
equipment.
Isolate the equipment before working on the
terminal strips.
To Next Page
Loading...
Need help?
General
