92 ADL500 • Quick installation guide - Specifications and connection
A.3
can communicate.
Usually PC’s are set in DHCP mode, so they request the network for an IP address. In case no DHCP server is availa-
the operations to do:
For Windows XP under Control Panel -
>
Network Connections
For Windows 7 under Control Panel -
>
Network and Sharing Center -
>
Change adapter settings
For Windows 10 under Control Panel -
>
Network & Internet -
>
Change your network settings -
>
Change adapter options
(for Windows XP) or “Internet Protocol Version 4 (TCP/IPv4) (for Windows 7 or Windows 10).
selection, the PC requests the IP address from the DHCP network.
(169.254.x.y), if no DHCP server is available in the network.
- IP address
- Subnet Mask
- Default Gateway
To Next Page
Loading...
Need help?
General