gefran ADV200 Functions Description And Parameters List

170 ADV200 • Functions description and parameters list
PARAMETERSONSELECTIONLISTS,BUTNOTDISPLAYEDONKEYPAD
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 220 Thetarefmon INT32 0.0 0.0 0.0 ER
Monitor value of the electrical motor angle.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 224 Fluxrefmon INT32 0.0 0.0 0.0 ER
Monitor value of the Flux reference.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 262 Motorspeednofilter FF INT16 16 0 0 0 ER
This parameter indicates the unltered motor speed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 362 Driveoverloadtrip BIT 16 0 0 1 ER
This signal indicates that the drive is in the overload condition. In the default condition the alarm is not triggered
as the relative action is set to Ignore.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 366 Driveoverload80 BIT 16 0 0 1 ER
This signal indicates that the drive has reached 80% of the thermal image accumulator (drive overload).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 626 Ramprefoutmon FF INT16 16 0 0 0 ER
This parameter displays the reference value output of the ramp remference function block.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 760 Rampoutmon FF INT16 16 0 0 0 ER
This parameter displays the reference value output of the ramp function block.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 764 Rampaccstate BIT 16 0 0 1 ER
This signal indicates whether the acceleration ramp is active.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 766 SRampdecstate BIT 16 0 0 1 ER
This signal indicates whether the deceleration ramp is active.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 934 Refis0 BIT 16 0 0 1 ER
This signal is active when the reference is below the limit set in parameter 930Reference0threshold.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 936 Refis0delay BIT 16 0 0 1 ER
This parameter is active when the reference is below the threshold set in parameter 930Reference0thresh-
old. The signal is enabled after the delay set with parameter932Referencedelay0.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
 944 Speedis0 BIT 16 0 0 1 ER

gefran ADV200 Specifications

General

Brand	gefran
Model	ADV200
Category	Inverter
Language	English