819XX_MAN_GRM-H_11-2022_ENG_pag. 58
5.5.1.10. ìInductive load on
Acronym App / GF_eXpress menu Attribute Retentive U.M. Default
Description
ind.E
Controls R/W
■
- 0
Inductive load control on..
Options:
5.5.1.11. Start modes
Acronym App / GF_eXpress menu Attribute Retentive U.M. Default
Description
P.On.t
Controls R/W
■
- 0
This parameter sets the mode in which the device turns on when power is supplied.
(for GRM-H-x-x-AN-x-x-x-x-x-x models only).
Options:
(*) The status of the digital inputs set as "Software Off" always has priority.
GRM-H-x-x-I-x-x-x-x-x-x-x models always turn on in ON software and in manual status).
5.5.1.12. Manual power saving
Acronym App / GF_eXpress menu Attribute Retentive U.M. Default
Description
Man.L
Controls R/W
■
- 0
Man.P manual power saving enabled for reset at power on
(for GRM-H-x-x-AN-x-x-x-x-x-x-x models only).
Options:
GRM-H-x-x-I-x-x-x-x-x-x-x models do not store manual power.
0 Disabled
1 Enabled
0 Controller operations resume with the same modes as
the last state (STATUS) prior to shutdown. (*)
1 Software OFF
2 Software ON
0 Disabled
1 Enabled
To Next Page
Loading...
Need help?
General
