Super Match
Operation
6. Prior to setting of weekly timer, please make time setting through main interface→ Menu→ Time
interface.
7. The slave unit of the wired controller has no setting of weekly timer.
8. Weekly timer setting done, it needs to exit the weekly timer interface to execute the order.
•Current clock setting
1. Proceed through main interface→Menu→Time→"Enter" key to enter, which is shown in Figure 6,
2. Default setting starts with the "Year"value, press the "Rightward key:to select "Year"-Month"→"Day"→"Hou
r"→"Minute"→"Week";or press the "Leftward key"to select "Week"→"Minute"→"Hour"→"Day"→"Month"→"Ye
ar"
3. When the time to be changed has been selected, press the "Upward key"or "Downward key"to adjust the
time;
4. After all the times have been adjusted, press "Enter"key to complete the setting.
To Next Page
Loading...
Need help?
General
