Network Video Recorder User Manual
132
(Optional) Check Save VCA Picture to save the captured pictures of face detection.
Drag the Sensitivity slider to set the detection sensitivity. Sensitivity range: [1-5]. The higher the
value is, the more easily the face will be detected.
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Click Apply.
Vehicle Detection
Purpose
Vehicle detection is available for road traffic monitoring. In Vehicle Detection, a passed vehicle can
be detected and the picture of its license plate can be captured. You can send an alarm signal to
notify the surveillance center and upload the captured picture to an FTP server.
Go to System > Event > Smart Event.
Click Vehicle.
Vehicle Detection
Select a camera to configure.
Check Enable Vehicle Detection.
Optionally, check Save VCA Picture to save the captured vehicle detection pictures.
To Next Page
Loading...
Need help?
General
