Network Video Recorder User Manual
198
Restore Default Settings
Go to Maintenance > Default.
Restore Defaults
Select the restore type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet
mask, gateway, MTU, NIC working mode, default route, server port, etc.) and user account
parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to inactive status.
The device will reboot automatically after restoring to the default settings.
To Next Page
Loading...
Need help?
General
