Network Video Recorder User Manual
48
Chapter 3 Camera Management
Add IP Cameras
Add IP Cameras Manually
Purpose:
Before you view live video or record video files, you must add network cameras to the device.
Before You Start:
Ensure the network connection is valid and the IP camera has been activated.
Click on the main menu.
Click Custom Add.
Set IP Camera Address, Protocol, Management Port, Transfer Protocol, User Name, and
Password. Management Port ranges from 1 to 65535.
Add IP Camera
(Optional) Check Use Channel Default Password to use the default password to add the camera.
(Optional) Check Use Default Port to use the default management port to add the camera. For
SDK service, the default port value is 8000. For enhanced SDK service, the default value is 8443.
The function is only available when you use HIKVISION protocol.
To Next Page
Loading...
Need help?
General
