Network Video Recorder User Manual
41
Login to the Device
Log in via Unlock Pattern
Only the admin user has permission to unlock the device.
Before you Start
Configure the unlock pattern before unlocking. Refer to Chapter 2.3 Configure Login Unlock
Pattern.
Right click the mouse and select the menu to enter the interface.
Draw the Unlock Pattern
Draw the pre-defined pattern to unlock and enter the menu operation.
If you have forgotten your pattern, select Forgot My Pattern or Switch User to enter the
normal login dialog box.
If the pattern you draw is different from the pattern you configured, try again.
If you draw the wrong pattern more than five times, the system will switch to the normal
login mode automatically.
Log in via a Password
Purpose:
To Next Page
Loading...
Need help?
General
