Network Video Recorder User Manual
171
Edit the admin user information as desired, including a new admin password (strong password is
required) and MAC address.
Edit the unlock pattern for the admin user account.
1) Check Enable Unlock Pattern to enable the use of an unlock pattern when logging in to the
device.
2) Use the mouse to draw a pattern among the 9 dots on the screen, and release the mouse
when the pattern is done.
Check Export of Export GUID to export the GUID file for the admin user account.
When the admin password is changed, export the new GUID to the connected USB flash disk in
the Import/Export interface for the future password resetting.
Configure security question for password resetting.
Configure reserved email for password resetting.
Click OK to save the settings.
Edit an Operator/Guest User
You can edit the user information, including user name, password, permission level, and MAC
address.
Go to System > User.
Select a user from the list and click Modify.
To Next Page
Loading...
Need help?
General
