Network Video Recorder User Manual
56
Configure Privacy Mask
Purpose
The privacy mask protects personal privacy by concealing parts of the image from view or
recording with a masked area.
Go to Camera >Privacy Mask.
Select the camera to set privacy mask.
Click Enable to enable this feature.
Use the mouse to draw a zone on the window. The zones will be marked by different frame colors.
Privacy Mask Settings Interface
Up to 4 privacy masks zones can be configured and the size of each area can be adjusted.
Related Operation:
Clear the configured privacy mask zones on the window by clicking the corresponding Clear Zone1-
4 icons on the right of the window, or click Clear All to clear all zones.
Click Apply.
To Next Page
Loading...
Need help?
General
