Network Video Recorder User Manual
8
Supports playback by transcoded stream
Manual capture, continuous capture of video images and playback of captured pictures
Supports enabling H.264+ to ensure high video quality with lowered bitrate
Files Management
Search and export vehicle detection files and human appearance files
Export video data by USB, SATA or eSATA device
Export video clips when playback
Either Normal or Hot Spare working mode is configurable to constitute an N+1 hot spare
system
Alarm and Exception
Configurable arming time of alarm input/output
Alarm for video loss, motion detection, tampering, abnormal signal, video input/output
standard mismatch, illegal login, network disconnected, IP confliction, abnormal
record/capture, HDD error, and HDD full, etc.
POS triggered alarm
VCA detection alarm is supported
Smart analysis for people counting and heat map
Connectable to the thermal network camera
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending e-
mail and alarm output
Automatic restore when system is abnormal
Other Local Functions
Operable by front panel, mouse, remote control, or control keyboard
Three-level user management; admin user is allowed to create many operating accounts and
define their operating permission, which includes the limit to access any channel
Admin password resetting by exporting/importing a GUID file
Operation, alarm, exceptions, and log recording and searching
Manually triggering and clearing alarms
Import and export device configuration information
Network Function
Two self-adaptive 10M/100M/1000 Mbps network interfaces
IPv6 is supported
TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, and iSCSI are supported
TCP, UDP and RTP for unicast
Auto/Manual port mapping by UPnP
TM