HIKVISION DS-K1T320 Series User Manual

Figure 7-5 Add Face Picture
6.
Look a
t the camera.
Note
●
Mak
e sure your face picture is in the face picture outline when adding the face picture.
●
Make sure the captured face picture is in good quality and is accurate.
●
For details about the instrucons of adding face pictures, see
Tips When Collecng/
Comparing Face Picture .
Aer completely adding the face picture, a captured face picture will be displayed at the center
of the pag
e.
7.
Press OK to save the face picture.
8.
Oponal: Press ESC to select Retake and adjust your face posion to add the face picture again.
9.
Set the user role.
Administrator
The user is the administrator. Except for the normal aendance
funcon, the user can also
enter the Home page to operate aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the
inial
page.
10.
Press ESC and then press OK to save the sengs.
7.3.3 Add Fingerprint
Add a ngerprint for the user and the user can authencate via the added ngerprint.
DS-K1T320 Series Face
Recoginon Terminal User Manual
32

HIKVISION DS-K1T320 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T320 Series
Category	Touch terminals
Language	English