HIKVISION DS-K1T320 Series User Manual

7.9.4 Set Manual and Auto Aendance via Device
Set the aendance mode as Manual and Auto, and the system will automacally change the
aendance status according to the congured schedule. At the same me you can manually
chang
e the
aendance status aer the authencaon.
Before You Start
Add at least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1.
Select T&A to enter the T&A Status page.
2.
Set the Aendance Mode as Manual and Auto.
Figure 7-11 Manual and Auto Mode
3.
Enable the Aendance Status Required
funcon.
4.
Enable a group of aendance status.
Note
The
Aendance Property will not be changed.
5.
Oponal: Select an s
tatus and change its name if required.
The name will be displayed on the T & A Status page and the authencaon result page.
6.
Set the status' schedule.
1) Select Aendance Schedule.
2)
Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
3) Set the selected aendance status's start me of the day.
4) Press OK.
5) Repeat step 1 to 4 according to your actual needs.
DS-K1T320 Series Face Recoginon Terminal User Manual
46

HIKVISION DS-K1T320 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T320 Series
Category	Touch terminals
Language	English