Video Access Control Terminal·User Manual
127
7.16.3 Event Playback
Purpose:
The recordings triggered by event, such as motion detection, VCA detection or behavior analysis,
can be searched for Event Playback and this function requires the support of the connected device.
Searching Video Files for Event Playback
Steps:
1. Open the Remote Playback page.
2. Select the camera and start the normal playback. Refer to Chapter 8.5.2 Normal Playback.
3. Click and the motion detection triggered recording will be searched by default.
4. Click the calendars icon to activate the calendars dialog box.
Select the start and end date and set the accurate time.
Click OK to save the searching period.
Note: In the calendar, the date which has scheduled records will be marked with and the
date with event records will be marked with .
5. Select the event type from the drop-down list and the found video files will be displayed. You
can filter the results by inputting the keyword in the Filter text field. Or you can click to go
back to the normal playback.
6. Select the video file from the search result list, and then click the icon on the video file, or
double-click the video file to play the video on the corresponding display window of playback.