EasyManuals Logo
Home>HIKVISION>IP Access Controllers>DS-K1T501SF

HIKVISION DS-K1T501SF User Manual

HIKVISION DS-K1T501SF
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Video Access Control Terminal·User Manual
89
For the authentication group which certificate type is Local Authentication, up to 8 card
groups can be added to the authentication group.
For the authentication group which certificate type is Local Authentication and Super
Password or Local Authentication and Remotely Open Door, up to 7 card groups can be
added to the authentication group.
7.9.4 Open Door with First Card
Purpose:
You can set multiple first cards for one access control point. After the first card swiping, it allows
multiple persons access the door or other authentication actions. The first card mode contains
Remain Open with First Card, and Disable Remain Open with First Card.
Remain Open with First Card: The door remains open for the configured time duration after
the first card swiping until the remain open duration ends.
Disable Remain Open with First Card: Disable the function.
Notes:
The first card authorization is effective only on the current day. The authorization will be
expired after 24:00 on the current day.
You can swipe the first card again to disable the first card mode.
Steps:
1. Click Open Door with First Card tab to enter the following interface.
2. Select an access control device from the list on the left.
3. Select the first card mode in the drop-down list for the access control point.
4. (Optional) If you select Remain Open with First Card, you should set remain open duration.
Notes:

Table of Contents

Other manuals for HIKVISION DS-K1T501SF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T501SF and is the answer not in the manual?

HIKVISION DS-K1T501SF Specifications

General IconGeneral
TypeBasic access control reader
Product colorGray
Cards capacity50000 cards
Housing materialMetal
Keypad integratedNo
Fingerprint readerYes
Authentication typeAccess chip/card, Biometric, Face recognition
Transaction capacity200000
Fingerprint sensor typeOptical
Identification (1:N) time1.5 s
False Rejection Rate (FRR)0.01 %
False Acceptance Rate (FAR)0.001 %
Access chip/card reader typeContactless
International Protection (IP) codeIP65
DC current (max)600 A
DC voltage range12 V
Total megapixels2 MP
Front camera typeSingle camera
PC connected-
RS-485 ports1
Operating temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth218 mm
Width78 mm
Height41 mm

Related product manuals