HIKVISION DS-TCG227-A Series User Manual

User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
10
“The device is activated successfully” will be updated in the interface.
Figure 2-2 Activate Interface(client)
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower case letters,
numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
 Keep capture unit IP address on the same network segment with computer IP
address.
 If there are many capture units in your network, we recommend you repeat step 3)
to edit IP address, subnet mask and gateway parameters to avoid exceptional visit.
 The default account is “admin”. We recommend you create a new account, please
refer to User Management.
2.4 Activation via Web Browser
Purpose:
Activate and visit device through web browser.
Precondition required:
 Connect the computer and capture unit through cable.
 Keep capture unit IP address on the same network segment with computer IP
address.
Steps:
1. Open the web browser, and enter default capture unit IP address. The
interface will be as followed.

HIKVISION DS-TCG227-A Series Specifications

General

Brand	HIKVISION
Model	DS-TCG227-A Series
Category	Security Camera
Language	English