User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
57
Scheduled Switch: Configure the Day/Night Mode, Start Time, and End
Time.
Figure 6-53 ICR Mode- Scheduled Switch
3. Click Save to save the settings.
6.9 Configure Entrances and Exits
6.9.1 Configure Entrance and Exit
Purpose:
You can configure the control mode, relay, vehicle management mode, vehicle
information management, and remote barrier gate control for the entrance and exit.
Steps:
1. Go to Configuration > Device Configuration > Entrances and Exits >
Entrance and Exit.
Figure 6-54 Entrance and Exit Configuration