HIKVISION DS-TCG227-A Series User Manual

User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
19
For different models, the number of internal and external supplement lights is
different. Please refer to the actual product.
Steps:
1. Go to Live View page.
2. Click Supplement Light.
3. Select F1.
4. Configure the constant light control mode.
 Controlling constant light according to brightness condition:
Figure 3-4 Supplement Light Configuration (1)
1) Check Control Constant Light According to Brightness Condition. Then
the light will change brightness according to the environment.
2) Click Save to save the settings.
 Controlling constant light according to time schedule:
Figure 3-5 Supplement Light Configuration (2)
1) Check Control Constant Light According to Time Schedule. Then the
light will work only during the configured time schedule.
2) Configure the Start Time and End Time.
3) Click Save to save the settings.
3.3 Configure Image Parameters
Purpose:

HIKVISION DS-TCG227-A Series Specifications

General

Brand	HIKVISION
Model	DS-TCG227-A Series
Category	Security Camera
Language	English