HIKVISION DS-TCG227-A Series User Manual

User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
11
Figure 2-3 Activate Interface(Web Browser)
2. Set password, and enter password again to confirm it.
3. Click OK to finish the activation.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower case letters,
numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
 (Optional) If there are many capture units in your network, we recommend you
repeat step 3) to edit IP address, subnet mask and gateway parameters to avoid
exceptional visit.
2.5 Login
Steps:
1. Open the web browser.
2. Enter the IP address of the capture unit in the address bar, e.g., 10.10.1.64
and press the Enter key to enter the login interface.
3. Enter the user name and password and click Login.

HIKVISION DS-TCG227-A Series Specifications

General

Brand	HIKVISION
Model	DS-TCG227-A Series
Category	Security Camera
Language	English