HIKVISION DS-TCG227-A Series User Manual

User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
8
Chapter 2 Getting Started
2.1 Activation
Activate the capture unit and set login password before getting started. You can
activate it via SADP software, client and web browser.
STRONG PASSWORD RECOMMENDED–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower case letters,
numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
 Factory default value
IP Address: 192.168.1.64
Port number: 8000
User name: admin
2.2 Activation via SADP Software
Purpose:
Search and connect the device through SADP software.
Precondition required:
 Installed the SADP software.
 Connect the computer and capture unit on the same network segment.
Steps:
1. Run the SADP software, and search the online device in LAN.
2. Check the capture unit that not activated. Set password in Activate Device,
and enter the password again to confirm it. Click Activate as following
figure.

HIKVISION DS-TCG227-A Series Specifications

General

Brand	HIKVISION
Model	DS-TCG227-A Series
Category	Security Camera
Language	English