User Manual of DS-TCG227-A Series Entrance/Exit Capture Unit
25
Figure 6-2 Local Configuration
2. Configure the following parameters.
Live View Parameters: Set the protocol type, live view performance, and rules.
Protocol Type: TCP and UDP are selectable.
TCP: Ensures complete delivery of streaming data and better video quality,
yet the real-time transmission will be affected.
UDP: Provides real-time audio and video streams.
Live View Performance: Set the live view performance to Real-time,
Balanced or Fluent.
Rules: It refers to the rules on your local browser. Select Enable or Disable to
display or not display the colored marks when the motion detection, face
detection, or intrusion detection is triggered. E.g.: enabled as the rules are, and
the face detection is enabled as well, when a face is detected, it will be marked
with a green rectangle on the live view.
Record File Settings: Set the saving path of the recorded video files. Valid for
the record files you recorded with the web browser.
Record File Size: Select the packed size of the manually recorded and
downloaded video files to 256M, 512M or 1G. After the selection, the
maximum record file size is the value you selected.
Save record files to: Set the saving path for the manually recorded video files.
Picture Settings: Set the saving paths of the captured pictures. Valid for the
pictures you captured with the web browser.
To Next Page
Loading...
Need help?
General
