EasyManuals Logo
Home>HIKVISION>DVR>iDS-7200AHQHI-M Series

HIKVISION iDS-7200AHQHI-M Series User Manual

HIKVISION iDS-7200AHQHI-M Series
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #111 background imageLoading...
Page #111 background image
11.9.2 ISAPI Service
ISAPI (Internet Server Applicaon Programming Interface) is an open protocol based on HTTP,
which can realize the
communicaon between the system devices (e.g., network camera, NVR,
etc.). The device is as a server, the system can nd and connect the device.
Steps
1. Go to System → System Service → System Service .
2. Check Enable ISAPI.
3. Click Apply.
4. Restart the device to take
eect the sengs.
11.9.3 RTSP
Authencaon
You can specically secure the stream data of live view by seng the RTSP authencaon.
Steps
1. Go to System → System Service → System Service .
Figure 11-14 RTSP Authencaon
2. Select RTSP Authencaon Type.
Note
Two authencaon types are selectable, if you select digest, only the request with digest
authencaon can access the video stream by the RTSP protocol via the IP address. For security
reasons, it is recommended to select digest as the authencaon type.
3. Click Apply.
4. Restart the device to take eect the sengs.
ATM Digital Video Recorder User Manual
96

Table of Contents

Other manuals for HIKVISION iDS-7200AHQHI-M Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION iDS-7200AHQHI-M Series and is the answer not in the manual?

HIKVISION iDS-7200AHQHI-M Series Specifications

General IconGeneral
BrandHIKVISION
ModeliDS-7200AHQHI-M Series
CategoryDVR
LanguageEnglish

Related product manuals