HIKVISION iDS-7200AHQHI-M Series User Manual

Before You Start
You must register the DynDNS, PeanutHull, or NO-IP services with your ISP before conguring
DDNS sengs.
Steps
1. Go to System → Network → TCP/IP → DDNS
Figure 7-2 DDNS Sengs
2. Check Enable.
3. Select DDNS Type as DynDNS.
4. Enter Server Address for DynDNS (i.e., members.dyndns.org).
5. Under Device Domain Name, enter the domain name obtained from the DynDNS Website.
6. Enter User Name and Password registered in the DynDNS Website.
7. Click Apply.
7.3
Congure PPPoE
If the device is connected to the Internet through PPPoE, you need to congure the user name and
password accordingly under System → Network → TCP/IP → PPPoE .
Note
Contact your Internet service provider for details about PPPoE service.
7.4 Congure NTP
Connecon to a network me protocol (NTP) server can be congured on your device to ensure
the system's date and me accuracy.
Steps
1. Go to System → Network → TCP/IP → NTP .
ATM Digital Video Recorder User Manual
60

HIKVISION iDS-7200AHQHI-M Series Specifications

General

Brand	HIKVISION
Model	iDS-7200AHQHI-M Series
Category	DVR
Language	English