Chapter 1 Basic Operaon
1.1 Acvate Your Device
1.1.1 Default User and IP Address
•
Default administrator account: admin.
• Default IPv4 address: 192.168.1.64.
1.1.2
Acvate via Local Menu
For the rst-me access, you need to acvate the device by seng an admin password. No
operaon is allowed before acvaon. You can also acvate the device via Web Browser, SADP or
Client
Soware.
Steps
1. Enter the admin password twice.
Figure 1-1 Acvate via Local Menu
Warning
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case leers, lower
case leers, numbers, and special characters) in order to increase the security of your product.
ATM Digital Video Recorder User Manual
1