HIKVISION iDS-7200AHQHI-M Series User Manual

4.5 Congure Linkage Acons
Alarm linkage acons will be acvated when an alarm or excepon occurs, including Event Hint
Display, Full Screen Monitoring, Audible Warning (buzzer), Nofy Surveillance Center, Trigger Alarm
Output, and Send Email.
4.5.1 Congure Auto-Switch Full Screen Monitoring
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel
congured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must congure the auto-switch dwell me.
Note
Auto-switch will terminate once the alarm stops and back to the live view interface.
Steps
1. Go to System → View → General .
2. Set the event output and dwell
me.
Event Output
Select the output to show the event video.
Full Screen Monitoring Dwell Time
Set the me in seconds to show the alarm event screen. If alarms are triggered
simultaneously in several channels, their full-screen images will be switched at an interval of
10 seconds (default dwell
me).
3. Go to the Linkage Acon interface of the alarm detecon (e.g., moon detecon, video
tampering, face
detecon, etc.).
4. Select the Full Screen Monitoring alarm linkage acon.
5. Select the channel(s) in Trigger Channel for full screen monitoring.
4.5.2
Congure Audio Warning
The audio warning has the system to trigger an audible beep when an alarm is detected.
Steps
1. Go to System → View → General .
2. Enable the audio output and set the volume.
3. Go to Linkage
Acon interface of the alarm detecon (e.g., moon detecon, video tampering,
face
detecon, etc.).
4. Select the Audio Warning alarm linkage acon.
ATM Digital Video Recorder User Manual
50

HIKVISION iDS-7200AHQHI-M Series Specifications

General

Brand	HIKVISION
Model	iDS-7200AHQHI-M Series
Category	DVR
Language	English