Sub-Stream
Sub-stream is a second codec that runs alongside the main stream. It allows you to reduce the
outgoing internet bandwidth without sacricing your direct recording quality.
Sub-stream is oen exclusively used by apps to view live video. Users with limited internet speeds
may
benet most from this seng.
Picture
The picture refers to the live picture capture in connuous or event recording type. ( Storage →
Capture Schedule → Advanced
Picture Quality
Set the picture quality to low, medium or high. The higher picture quality results in more
storage space requirement.
Interval
The interval of capturing live picture.
Capture Delay Time
The
duraon of capturing pictures.
3.1.2 Enable the H.265 Stream Access
The device can automacally switch to the H.265 stream of IP camera (which supports H.265 video
format) for the
inial access.
Go to Camera → More Sengs → H.265 Auto Switch Conguraon to enable the funcon.
3.1.3 Manual Recording
You can click to manually start/stop recording videos at live view.
3.1.4
Congure Plan Recording
The camera would automacally start/stop recording according to the congured recording
schedule.
Before You Start
• Ensure you have installed the HDDs to the device or added the network disks before storing the
video
les, pictures and log les.
• Before enabling Moon, Alarm, M | A (moon or alarm), M & A (moon and alarm), Event, and
Smart ATM triggered recording and capture, you must
congure the moon detecon sengs,
alarm input sengs and other events as well. Refer to Event for details.
ATM Digital Video Recorder User Manual
21