Hirschmann MACH 4000 User Manual

Network load control
34
8.5 Flow control
Basic - L3P
Release 4.0 11/07
8.5.2 Setting the flow control
 Select the
Basics:Port Configuration dialog.
In the "Flow Control on" column, you checkmark this port to specify
that flow control is active here. You also activate the global "Flow
Control" switch in the
Switching:Global dialog.
 Select the Switching:Global dialog.
With this dialog you can
X switch off the flow control at all ports or
X switch on the flow control at those ports for which the flow control
is selected in the port configuration table.

Hirschmann MACH 4000 Specifications

General

Brand	Hirschmann
Model	MACH 4000
Category	Network Router
Language	English