Protection from unauthorized access
Basic - L3P
Release
4.0
11/07
6.2
Telnet/Web/SSH access
7
6.2 Telnet/Web/SSH access
6.2.1 Description of Telnet access
The Telnet server of the Switch allows you to configure the Switch by using
the Command Line Interface (in-band). You can deactivate the Telnet server
to prevent Telnet access to the Switch.
On delivery, the server is deactivated.
After the Telnet server has been deactivated, you will no longer be able to
access the switch via a new Telnet connection. If a Telnet connection already
exists, it is kept.
Note: The Command Line Interface (out-of-band) and the Security:Tel-
net/Web access dialog in the Web-based interface allow you to reactivate
the Telnet server.
6.2.2 Description of Web access
The Web server of the Switch allows you to configure the Switch by using the
Web-based interface. You can deactivate the Web server to prevent Web ac-
cess to the Switch.
On delivery, the server is deactivated.
To Next Page
Loading...
Need help?
General
