Loading/saving settings
Basic - L3P
Release
4.0
11/07
3.2
Saving settings
7
3.2 Saving settings
In the "Save" frame, you have the option to
X save the current configuration on the Switch
X save the current configuration in binary form in a file under the specified
URL, or as an editable and readable script
X save the current configuration in binary form or as an editable and read-
able script on the PC.
3.2.1 Saving locally (and on the ACA)
The Switch allows you to save the current configuration data in the local non-
volatile memory and in the ACA.
Select the
Basics: Load/Save dialog.
In the "Save" frame, click "on the Switch".
Click "Save configuration". The Switch saves the current configura-
tion data in the local non-volatile memory and, if an ACA is connect-
ed, also in the ACA.
enable Switch to the Priviledged EXEC mode.
copy system:running-config
nvram:startup-config
The Switch saves the current configuration data
in the local non-volatile memory and, if an ACA is
connected, also in the ACA
To Next Page
Loading...
Need help?
General
