Loading/saving settings
8
3.2
Saving settings
Basic - L3P
Release
4.0
11/07
3.2.2 Saving in a file on URL
The Switch allows you to save the current configuration data in a file in the
connected network.
Note: The configuration file includes all configuration data, including the
password. Therefore pay attention to the access rights on the tftp server.
Select the
Basics: Load/Save dialog.
In the "Save" frame, click "on URL (binary)" to receive a binary file,
or "on URL (script)" to receive an editable and readable script.
In the "URL" frame, enter the path under which you want the Switch
to save the configuration file.
The URL identifies the path to the tftp server on which the Switch saves
the configuration file. The URL is in the format tftp://IP address of the
tftp server/path name/file name (e.g. tftp://149.218.112.5/
switch/config.dat).
Click "Save configuration".
enable Switch to the Priviledged EXEC mode.
copy nvram:startup-config
tftp://149.218.112.159/
switch/config.dat
The Switch saves the configuration data in a bina-
ry file on a tftp server in the connected network
copy nvram:script tftp://
10.0.1.159/switch/config.txt
The Switch saves the configuration data in a
script file on a tftp server in the connected net-
work
To Next Page
Loading...
Need help?
General
