Hirschmann MACH 4000 User Manual

Entering the IP Parameters
14
2.4 Loading the system configuration from the
Basic - L3P
Release 4.0 11/07
2.4 Loading the system configu-
ration from the ACA
The AutoConfiguration Adapter (ACA) is a device for
X storing the configuration data of a Switch and
X storing the Switch software.
In the case of a Switch failure, the ACA makes it possible to easily transfer
the configuration data by means of a substitute switch of the same type.
When you start the Switch, it checks for an ACA. If it finds an ACA with a valid
password and valid software, the Switch loads the configuration data from
the ACA.
The password is valid if
X the password in the Switch matches the password in the ACA or
X the preset password is entered in the Switch.
To save the configuration data in the ACA, see "Saving locally (and on the
ACA)" on page 59.

Hirschmann MACH 4000 Specifications

General

Brand	Hirschmann
Model	MACH 4000
Category	Network Router
Language	English