Operation diagnosis
26
9.10
Reports
Basic - L3P
Release
4.0
11/07
9.10Reports
The following reports are available for the diagnostics:
X Log file
The log file is an HTML file in which the switch writes all the important de-
vice-internal events
X System information.
The system information is an HTML file containing all system-relevant da-
ta.
X System information.
The security data sheet IAONA is a data sheet in the XML format that has
been standardized by IAONA (Industrial Automation Open Networking Al-
liance). Among other data, it contains security-related information on the
accessible ports and the associated protocols.
Diagnostic table
The diagnostic table lists the alarms (traps) that were generated.
In service situations, these reports provide the technician with the necessary
information.
Syslog
The Switch enables you to send messages about important device-inter-
nal events to up to 4 Syslog servers.
Select the Diagnostics:Report dialog.
Click "Log File" to open the HTML file in a new browser window.
Click "System Information" to open the HTML file in a new browser
window.
enable Switch to the Priviledged EXEC mode.
configure Switch to the Configuration mode.
logging host 10.0.1.159 514 3 Select the recipient of the log messages and its
port 514. The "3" indicates the importance of the
message sent by the Switch. "3" means "error".
logging syslog Enable the Syslog function.
exit Switch to the Priviledged EXEC mode.
show logging hosts Display the Syslog host settings.
To Next Page
Loading...
Need help?
General
