9.1.3 Flush mounting dimensions
M11571-3 v6
IEC04000465 V4 EN-US
Figure 54: Flush mounting
Case size
Tolerance
Cut-out dimensions (inches)
A
+/0.04
B
+/0.04
C D
6U, 1/2 x 19” 8.27 10.01 0.16–0.39 0.53
6U, 3/4 x 19” 12.69 10.01 0.16–0.39 0.53
6U, 1/1 x 19” 17.11 10.01 0.16–0.39 0.53
E = 7.52” without rear protection cover, 9.12” with rear protection cover
Section 9 1MRK514026-UUS Rev. P
Technical data
84 670 series
Installation manual
© 2017 - 2023 Hitachi Energy. All rights reserved