SECURITY
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
110
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
110
Hitron CGNVM User’s Guide
6.3.2 Adding or Editing a Service Filter Trusted Device
Rule
To add a new trusted device rule, click Add Trusted PC in the Security > Service
Filter screen.
To edit an existing trusted device rule, locate the rule in the Security > Service
Filter screen and click its Manage button.
The following screen displays.
Figure 47: The Security: Service Filter Trusted Device Add/Edit Screen
The following table describes the labels in this screen.
Table 37: The Security: Service Filter Trusted Device Add/Edit Screen
Host Name Enter a name to identify the device.
MAC Address Enter the Media Access Control (MAC) address of the
device.
Rule Status Use this field to define whether the trusted device rule
should be active or not.
Select Enabled to activate the trusted device rule.
Select Disabled to deactivate the trusted device
rule.
Apply Click this to save your changes to the fields in this
screen.
Close Click this to return to the Service Filter screen without
saving your changes to the rule.
To Next Page
Loading...
Need help?
General
