Hitron CGNVM User Manual

BASIC
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
66
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
66
Hitron CGNVM User’s Guide
Figure 24: The Basic: Port Triggering Add/Edit Screen
The following table describes the labels in this screen.
Table 19: The Basic: Port Triggering Add/Edit Screen
Application Name Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Trigger Port Range Use these fields to specify the trigger ports. When the
CGNVM detects activity on any of these ports originating
from a computer on the LAN, it automatically opens the
Target ports in expectation of incoming traffic.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Target Port Range Use these fields to specify the target ports. The CGNVM
opens these ports in expectation of incoming traffic
whenever it detects activity on any of the Trigger ports.
The incoming traffic is forwarded to these ports on the
computer connected to the LAN.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.

Hitron CGNVM Specifications

General

Brand	Hitron
Model	CGNVM
Category	Gateway
Language	English