INTRODUCTION
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
25
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
25
Hitron CGNVM User’s Guide
If your network has an active DHCP server, select Get an IP address
automatically.
If your network does not have an active DHCP server, select Use the
following IP address. In the IP address field, enter a value between
192.168.0.2 and 192.168.0.254 (default). In the Subnet mask field, enter
255.255.255.0 (default).
NOTE: If your CGNVM is not using the default IP address, enter an IP address and
subnet mask that places your computer in the same subnet as the CGNVM.
6 Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area
Connection Properties window, click OK.
Your computer now obtains an IP address from the CGNVM, or uses the IP address
that you specified, and can communicate with the CGNVM.
1.6 Login to the CGNVM
Take the following steps to login to the CGNVM’s GUI.
NOTE: You can login to the CGNVM’s GUI via the wireless interface. However, it is
strongly recommended that you configure the CGNVM via a wired connection
on the LAN.
1 Open a browser window.
2 Enter the CGNVM’s IP address (default 192.168.0.1) in the URL bar. The Login
screen displays.
To Next Page
Loading...
Need help?
General
