WIRELESS
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
92
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
92
Hitron CGNVM User’s Guide
The following table describes the labels in this screen.
Table 27: The Wireless: Access Control Screen
Connected Devices
Host Name This displays the name of each network device
connected on the wireless network.
IP Address This displays the IP address of each network device
connected on the wireless network.
MAC Address This displays the Media Access Control (MAC) address
of each network device connected on the wireless
network.
Type This displays whether the device’s IP address was
assigned by DHCP (DHCP-IP), or self-assigned.
Interface This displays the name of the interface on which the
relevant device is connected.
Status This displays whether or not the connected device is
active.
Action Click Manage to make changes to the device’s filtering
status; see Adding or Editing a Managed Device on
page 113 for information on the screen that displays.
Managed Devices
Block Rules Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Managed Devices
list and let all devices connect to the CGNVM.
Select Allow Listed to permit only devices you
added to the Managed Devices list to access the
CGNVM and the network. All other devices are
denied access.
Select Deny to permit all devices except those you
added to the Managed Devices list to access the
CGNVM and the network. The specified devices
are denied access.
Host Name This displays the name of each network device in the
list.
MAC Address This displays the Media Access Control (MAC) address
of each network device in the list.
To Next Page
Loading...
Need help?
General
