ADMIN
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
97
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
97
Hitron CGNVM User’s Guide
The following table describes the labels in this screen.
5.4 The Admin: Diagnostics Screen
Use this screen to perform ping and traceroute tests on IP addresses or URLs.
Click Admin > Diagnostics. The following screen displays.
Table 29: The Admin: Remote Management Screen
Protocol Use the relevant row to permit or forbid remote
management via the relevant protocol.
ON/OFF Select On to permit remote management via the
Select Off to forbid remote management via the
relevant protocol.
Remote IP Range Select Enabled to permit remote management, for all
protocols, from computers with IP addresses in the
range specified.
Select Disabled to allow computers with any IP
address to manage the CGNVM remotely.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
To Next Page
Loading...
Need help?
General
