BASIC
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
72
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
72
Hitron CGNVM User’s Guide
The following table describes the labels in this screen.
Table 22: The Basic: MoCA Screen
MoCA Status Select Enabled to turn the MoCA network off.
Select Disabled to turn the MoCA network
connection off.
Channel Plan The MoCA specification defines several channel plans
for communication on the cable network (see The
Multimedia over Coax Alliance on page 36). This field
allows you to select the channel plan that you want the
CGNVM to use.
Select the channel plan that you wish to use from the
dropdown list.
Figure 28: Channel Plan Options
Channel Use this field to define the channel on which you want
the CGNVM to communicate on the cable network,
dependent on the Channel Plan that you selected.
Select the channel plan that you wish to use from the
dropdown list. If you select SCAN, ensure that you also
configure the Scan Range (Start) and Scan Range
(End) fields.
Figure 29: Channel Options
To Next Page
Loading...
Need help?
General
