BASIC
Version 1.0, 02/2015. Copyright 2012 Hitron Technologies
60
Version 1.0, 02/2015. Copyright 2014 Hitron Technologies
60
Hitron CGNVM User’s Guide
3.4 The Basic: Port Forwarding Screen
Use this screen to configure port forwarding between computers on the WAN and
computers on the LAN. You can turn port forwarding on or off and configure new and
existing port forwarding rules.
Click Basic > Port Forwarding. The following screen displays.
Figure 21: The Basic: Port Forwarding Screen
The following table describes the labels in this screen.
Save Changes Click this to save your changes to the fields in this
screen.
Help Click this to see information about the fields in this
screen.
Table 16: The Basic: Port Forwarding Screen
All Port Forwarding
Rules
Use this field to turn port forwarding on or off.
Select Enabled to turn port forwarding on.
Select Disabled to turn port forwarding off.
Port Forwarding Rules
Application Name This displays the arbitrary name you assigned to the
rule when you created it.
Table 15: The Basic: Gateway Function Screen (continued)
To Next Page
Loading...
Need help?
General
