168
uuGauges and Driver Information InterfaceuDriver Information Interface
■ Example of customization settings
The steps for changing the “Trip A” Reset Timing setting to When Fully Refueled
are shown below. The default setting for “Trip A” Reset Timing is Manual Reset.
1. Press the button to select , then
press the ENTER button.
2. Press the / button until Meter Setup
appears on the display.
3. Press the ENTER button.
u Language appears first in the display.
19 CR-V PET JSS (KE KG)-32TLA6000.book 168 ページ 2018年7月23日 月曜日 午後6時8分