656
Turbo Engine Vehicle
Handling Precautions
The turbocharger is a high-precision device to obtain greater horsepower by
delivering a large volume of compressed air into the engine using a turbine driven by
the engine’s exhaust gas pressure.
• When the engine is cold just after starting, avoid revving the engine or sudden
acceleration.
• Always replace the engine oil and engine oil filter according to the maintenance
schedule. The turbine rotates at very high speeds over 100,000 rpm and its
temperature reaches over 700°C. It is lubricated and cooled by engine oil. If you
fail to replace the engine oil and filter at the scheduled distance or interval,
deteriorated engine oil may cause failure such as sticking and abnormal noise of
the turbine bearing.
1Turbo Engine Vehicle
The scheduled maintenance intervals for replacing
the engine oil and filter is indicated on the driver
information interface. Follow the information of
when to replace them.
2 Service Reminder System
*
P. 662
2 Oil Monitor System
*
P. 667
2 Maintenance Schedule
*
P. 672
2 Recommended Engine Oil P. 683
The temperature gauge is at upper level when you
restart the engine after driving under high load
conditions such as at high speed or in hilly terrain.
This is normal. The temperature gauge goes down
after you idle or drive the vehicle for about one
minute.
* Not available on all models
19 CR-V PET JSS (KE KG)-32TLA6000.book 656 ページ ２０１８年７月２３日 月曜日 午後６時８分
To Next Page
Loading...
Need help?
General
