uuIf a Tyre Goes FlatuChanging a Flat Tyre
738
11.Loosen each wheel nut about one turn
using the wheel nut wrench.
1. Place the jack under the jacking point
closest to the tyre to be changed.
■
How to Set Up the Jack
1How to Set Up the Jack
WARNING: The jack shall be placed on a flat and
stable surface on the same level as the vehicle is
parked.
The jack that came with your vehicle has the
following label.
1. See Owner’s Manual.
2. Never get under vehicle when supported by jack.
3. Place jack underneath reinforced area.
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tyre
exactly, and no person should place any
portion of their body under a vehicle that is
supported by a jack.
19 CR-V PET JSS (KE KG)-32TLA6000.book 738 ページ ２０１８年７月２３日 月曜日 午後６時８分
To Next Page
Loading...
Need help?
General
