Continued
51
uuSeat BeltsuFastening a Seat Belt
1. Pull out the seat belt’s small latch plate and
the latch plate from each holding slot in the
ceiling.
2. Line up the triangle marks on the small
latch plate and anchor buckle. Make sure
the seat belt is not twisted. Attach the belt
to the anchor buckle.
3. Insert the latch plate into the buckle.
Properly fasten the seat belt the same way
you fasten the lap/shoulder seat belt.
■
Seat Belt with Detachable Anchor
*
1Seat Belt with Detachable Anchor
*
To unlatch the detachable anchor, insert the latch
plate into the slot on the side of the anchor buckle.
Using the seat belt with the detachable
anchor unlatched increases the chance of
serious injury or death in a crash.
Before using the seat belt, make sure the
detachable anchor is correctly latched.
Small Latch Plate
Latch Plate
Small Latch Plate
Latch Plate
Anchor Buckle
Small Latch Plate
* Not available on all models
19 CR-V PET JSS (KE KG)-32TLA6000.book 51 ページ ２０１８年７月２３日 月曜日 午後６時８分
To Next Page
Loading...
Need help?
General
