uuService Reminder System
*
u
666
Reset the service reminder information display if you have performed the
maintenance service.
1. Turn the ignition switch to ON
(w
*1
.
2. Press the (display/information) button several times until is displayed.
3. Press the ENTER button.
4. Press and hold the ENTER button for about 10 seconds to enter the reset mode.
5. Press / button to select a maintenance item to reset, or to select All Due
Items (You can also select Cancel to end the process).
6. Press the ENTER button to reset the selected item.
7. Repeat from step 4 for other items you wish to reset.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
■
Resetting the Display
Failure to reset the service reminder information after
a maintenance service results in the system showing
incorrect maintenance intervals, which can lead to
serious mechanical problems.
You can reset also the service reminder system
information display using the audio/information
screen.
2 Customized Features P. 413
The dealer will reset the service reminder information
display after completing the required maintenance
service. If someone other than a dealer performs
maintenance service, reset the service reminder
information display yourself.
Models with Display Audio
(Display/Information)
Button
ENTER Button
/ Button
19 CR-V PET JSS (KE KG)-32TLA6000.book 666 ページ ２０１８年７月２３日 月曜日 午後６時８分
To Next Page
Loading...
Need help?
General
