98
Indicators
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
Parking Brake
and Brake
System Indicator
(Red)
• Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off if the parking
brake has been released.
• Comes on when the parking brake is
applied and goes off when it is
released.
• Comes on when the brake fluid level
is low.
• Comes on if there is a problem with
the brake system.
• The beeper sounds and the indicator
comes on if you drive with the
parking brake not fully released.
• Comes on while driving - Make sure
the parking brake is released. Check the
brake fluid level.
2 What to do when the indicator
comes on while driving P. 753
• Comes on along with the parking
brake and brake system indicator
(amber) - Immediately stop in a safe
place. Contact a dealer for repair. The
brake pedal becomes harder to operate.
Depress the pedal further than you
normally do.
• Comes on along with the ABS
indicator - Have your vehicle checked
by a dealer.
2 If the Brake System Indicator (Red)
Comes On or Blinks P. 753
19 CR-V PET JSS (KE KG)-32TLA6000.book 98 ページ ２０１８年７月２３日 月曜日 午後６時８分
To Next Page
Loading...
Need help?
General
