CT47 Mobile Computer Series User Guide 49
Assigning a SIM to SIM Slot 1
To assign a SIM to SIM Slot 1:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap SIM Selection .
3. Under Select New Configs, tap the arrow next to SIM Slot 1.
4. Select the SIM from the drop-down list.
5. Click APPLY.
6. A prompt verifies that you want to apply the new configuration. Tap OK.
7. The system indicates that the settings have been saved. Tap OK.
Using Dual SIM Dual Standby Mode
The CT47 allows you to enable a Dual SIM Dual Standby (DSDS) setup where both
SIMs are provisioned with separate mobile plans. In DSDS, both SIMs are active
but only one SIM can handle data at a time.
When DSDS mode is turned ON, both SIM Slots are shown. In this mode, SIM Slot 1
and SIM Slot 2 cannot be modified.
SIM Slots cannot be
modified in Dual SIM
Dual Standby mode.
Select the mobile carrier
Turn Dual SIM Dual
Standby OFF
To Next Page
Loading...
Need help?
General